Pro Touring 1969 Camaro

This awesome 1969 pro touring camaro belongs to Ed Borges (owner of Eddie Motorsports in Rancho Cucamonga California).  Ed’s camaro was featured in Chevy High Performance magazine last month. One of the most important features of a pro touring restomod is the right set of wheels.  Ed reached out to Boze looking for a nice set of pro touring wheels to give his camaro the perfect look and stance.  We built a set of our Victory forged wheels in sizes 18×8 front and 18×10 rear.  His wheels are wrapped in Nitto NT555 tires, sizes 245/40R-18 front and 285/35R-18 rear.  The wheels are finished with a brushed satin and polished two-tone finish on the centers and high polished lips.  Ed’s camaro sits on Speedtech Performance suspension accompanied by Viking adjustable coilover shocks.  For stopping power Ed decided to go with a set of Wilwood 4 piston brakes.  This camaro is also equiped with a nice stereo system.  The head unit is a Kenwood Excelon KDX-X300 with 6×9-inch speakers.  The body work was done by Paul Smoot of PSI autobody in Ontario California.  If you didn’t get a chance to see the feature than be sure to check out these pictures below taken by Robert Mcgaffin photography.  Enjoy! 

1960 Corvette Restomod

This may be the most Beautiful 1960 Restomod corvette we’ve ever seen.  The attention to detail on this build is absolutely top notch!  This corvette was built for a customer in London who wanted that distinctive British look of a Bentley.  We built a set of our Boze Injected forged wheels with a high polish finish.  We used hidden hardware to construct the wheels so the bolts are hidden behind the wheel flange.  This gives them a really clean look but still has the resemblance of pro touring corvette wheels. The back wheels may look wider but they’re actually the same width as the front wheels.  The wheels are 18×7″ on all four corners.  We used a shorter mounting pad on the rear wheels along with a lower offset to give the wheels a nice deep dish.  This staggered stance makes this beauty look like a pro touring corvette!  It’s not everyday you see a nice pro touring corvette with so much style! 

Quinn’s 1973 Camaro

Check out this awesome 1973 Pro Touring Camaro owned By Quinn Clancy of Ontario Canada.  Quinn loves to Autocross his camaro at Good-guys rod and custom shows and wanted a forged wheel that looks amazing but was also light weight.  He decided on our Boze Clutch wheels in sizes 18×9″ front and 18×10″ rear.  His wheels are finished with brushed/polish centers and brushed clear coated lips.  When it comes to stopping powder Quinn chose Wilwood 6 piston brakes.  His Camaro also has a Speedtech Performance Suspension.  If you’re out at a hot rod show or autocross event be sure to look for this awesome Pro Touring camaro.  

Boze 18×12″ Torque Wheel

We just finished another set of our Torque concave 3 piece wheels. The wheels are finished with our brushed satin and polished two-tone and are built on our deep concave center forging.  One of the nice things about our concave wheels is the large brake caliper clearance.  If a customer is running a 4 piston or six piston willwood brake or baer brake, our concave forged wheels will clear without a problem.  Another nice feature about our concave wheel profile is the large cross section thickness, which gives us the ability to machine a thin spoke and still keep a high wheel load rating.  This helps us make really strong light weight wheels.  Boze has been building forged wheels for over 20 years and we’re seeing a lot of our customer go to our concave designs.  This set of Torque wheels is going on a pro touring mustang for a customer in Florida.  Check back here in a few weeks and we’ll have pictures of this set of wheels on the customers car.  

Boze’s new “Performance Series”

Boze is proud to introduce our new “Performance Series” line of wheels.  The performance series are light weight wheels made from the finest 6061 T6 forged aluminum.  These stepped-lip 2 piece wheels are designed for muscle car and pro touring applications.  The Step lip design not only looks good but helps reduce overall wheel weight.  We build these wheels with a convex profile center forging so clearing large brakes is not a problem, whether it be a large Wilwood brake, Baer brake or any other large brake manufacturer.  These performance forged wheels are available in diameters 17″, 18″, 19″ and 20″.  The wheels pictured below are finished with brushed satin centers and high polished lips, this is just one of the many finishes we offer.  Some of our other popular finishes are ceramic matte bronze, matte gun metal, and satin black powder coat.  All of our wheels are custom built so if you have a Hotchkis suspension, TCI suspension, Detroit Speed Suspension, Ridetech suspension or any other pro touring chassis, our wheels can be build with any backspace to accommodate the proper fitment. If you’re building a pro-touring restomod, classic truck, or any other type of classic car, these are the wheels for you!

Pro Touring 1967 Chevelle

Once again Mike Mclin and the crew at The Restomod Store knock it out of the park with another amazing build!  This 1967 Pro Touring chevelle rolls on a Schwartz Performance chassis matched with Ridetech airbag suspension, Wilwood disc brakes, and Boze Intake forged wheels.  The front wheels are 18×8″ and the rear wheels are 18×10″.  Mike chose our brushed satin and polish two-tone finish to give the wheels some bling but also highlight the accents of each spoke.  For tires Mike’s running Nitto 555’s.  Inside Mike’s running Dakota Digital gauges Clayton Machine Works billet goodies, and a full Kenwood audio system.  Be sure to keep a look out for this Street Machine at a show near you in the future.  

Jeremy McLellan’s 1966 Chevelle

If you didn’t get a chance to see Jeremy McLellan’s 1966 Pro Touring Chevelle at the 2018 SEMA show well now you can see it in the current issue of Chevy High Performance magazine.  This stunning Chevelle sits on a set of 19×9″ and 20×12″ Boze Clutch and Clutch Concave forged wheels.  We finished the wheels with a satin black powder coat and custom engraved the center caps “Jerems” for Jeremy.  The wheels are wrapped in 275/35ZR19 and 335/35ZR20 Michelin Pilot Super Sport tires.  Sitting on a custom Art Morrison Chassis this Pro Touring restomod packs a 2016 Chevy Performance LT4.  For stopping power Jeremy chose 14″ 6 piston Wilwood disc brakes.  Jeremy’s Chevelle was built by Jeff Allison of Allison Customs in Bloomfield, NM.  This car was an absolute hit at the SEMA show.ow.

Step lip Mesh wheels

Here’s a really cool set of Boze step lip Mesh wheels we recently finished building for a customer.  The wheels are 17×7″ front and 17×11″ rear.  We finished these wheels with a bronze powder coated center and a brushed satin lip.  The wheels are going on a 1967 Pro Touring Fastback.  Not only do they look awesome but they are lightweight wheels as well.  The wheels are mounted on a set of Nitto Tires. Give us a call today and let Boze build a set of Pro Touring lightweight wheels for your car!  

1977 Pontiac Firebird

Darren Koenen’s 1977 Pro Touring Firebird is one awesome ride!  This firebird is packing a 6.2L 520 horse power Chevy LS3.  Boze has a lot of pro touring style wheels to choose from and Darren decided to keep that classic firebird look and go with our snowflake wheels.  We built his wheels in sizes 18×9″ front and 18×12″ rear and finished them with a high polish and gold two tone finish.  For the final touch we engraved his center caps with the Pontiac Firebird emblem.  His Boze wheels are wrapped in 255/45/18 and 335/30/18 Toyo Tires.  For stopping power Darren chose wilwood brakes.  If you like Darren’s Boze forged Snowflake wheels, call us today and let us build a set for you!  

New Champ wheel from Bozeforged

Boze Forged Wheels proudly introduces the all new Champ design to the Victory series.  This unique Wedge shaped five spoke design is cut on our shallow concave profile forging.  This wheel is not only light weight but is designed to fit over large aftermarket brakes such as wilwood and Baer Brakes.  The Champ is available in wheel sizes from 18″-22″ diameters and in 7″-15″ widths. Call Boze today and let us build you a set of forged wheels for your Pro Touring muscle car!