BOZE FORGED BLOG

July 13, 2010

American Heroes Project

Filed under: Cap Engraving,Projects — admin @ 6:27 pm

On Saturday June 26th, the Project American Heroes Chevelle was sold at the Barrett-Jackson OC auction for $250K. 100% of the money raised went to the Armed Force Foundation, which helps our wounded warriors and their families with financial support and other assistance. The Armed Forces Foundation is a non-profit group and would welcome your donations. All of us at Boze are proud and honored to have helped with this outstanding project. 

Click on the links below to see videos of the American Heroes Project  at the Barrett-Jackson auction…

Barrett-Jackson Orange County – Project American Heroes 2010

Boze Alloys wheels on the American Heroes 1970 Chevelle at Barrett-Jackson

June 24, 2010

SCAR Project

Filed under: Cap Engraving,Projects — admin @ 3:13 pm

Update 7/27/10: This SCAR Camaro was the winner of the 2010 Street Machine of the Year award!!! Congratulations to Karen and the crew at Lakeside Rods! 

You are invited to a special sneak preview of the beautiful first gen Camaro owned by Karen Leisinger and built by Lakeside Rods. This unique project is receiving the final touches for the upcoming 2010 Goodguys event in Columbus. This unbelievable Camaro is set to make a strong run at the Street Machine of the Year honors. All of us at Team Boze are extremely excited to have been chosen to develop a special wheel design for this Scar project. Check out the list of modifications and parts, as well as the concept drawings by Eric Brockmeyer. Good Luck!

Renderings by Eric Brockmeyer

LS Motor w/ 600HP

Full Chassis by Lakeside Rods and DSE w/ remote reservoir shocks

Baer Brakes- 14” – 6 Piston

Custom Boze Wheels- 18 8’s and 20 12’s

PRC Radiator and AC Core

Vintage Air AC/Heat/Frontrunner

DSE- Stainless Headers

DSE- Roll Bar

Custom Rear wheel tubs by DSE & Lakeside Rods

3” Exhaust Custom built by Lakeside Rods

 Flowmaster Super 44’s Mufflers

Custom Fuel Tank by Lakeside Rods & Rides

Ring Brothers Hood hinges

Gearstar 200R4 Transmission w/ Yenk Converter – Good for 1000+ HP

2010 Camaro parts- Headlights, Taillights, and roof skin

Aerocatch Hood Latches

Custom Classic Instruments Gauges

Specialty Power Windows

Momo Steering Wheel / IDidit Steering column

Following Body Modifications by Lakeside Rods of Rockwell City, IA:

Front Facia- Hand built

Motor Surround- fabricated

Hood stretched and made of Carbon Fiber

Cowl vent removed

Aluminum Interior panels- handformed for custom interior

Floor raised so no exhaust or anything below scrub line

Fender Flares- all four corners  were widened

Rocker Panels- lowered and widened

All fender lips removed

Working Rear quarter  Brake duct

Door handle relief to resemble Corvette

Dash- handformed steel

Rear glass lays flatter  because of deck lid

Flush Fit Glass (no trim)

Remove wing vents to use 68 glass

Trunk deck lid raised 2 ½”

Trunk cut to match 2010  roof skin w/ custom windowed spoiler

Fabricated Rear Facia w/ removable lower panel

Custom Interior to be done by  Dan Weber Custom Interiors of Alexandria, MN

November 11, 2009

We Honor and Support Our Veterans Today

Filed under: Cap Engraving,Projects — admin @ 3:36 pm

This year the folks at Super Chevy magazine and Route 66 Motorsports teamed up with Armed Forces Foundation to a build the American Heroes III project a 1970 Chevelle. Last year vehicle, the American Heroes II a 1969 Camaro was sold at the Florida Barrett-Jackson show for $500,000. The funds raised went to the Armed Forces Foundation to help the families of fallen and disabled US troops and veterans, visit www.projectamericanheroes.net for details on this great charity. This year Boze has given the opportunity to help out, along with other vendors, such as; Baer brakes, Detroit Speed, Edelbrock and other companies. While Bill Jelinek at Route 66 Motorsports started reshaping the Chevelle, we got busy designing a special new wheel for this project.Project American Heroes Chevelle

The Hero wheel. A unique and exclusive design, featuring six spokes – each spoke engraved with a branch of service.  Highlighted with a brushed satin and polished two-toned finish.  Muscle car stance has a 18×8/18×10 combo.

Hero wheel - Marines

 Hero wheel 

All of us at Team Boze are proud to be involved in the project and grateful for the freedom we enjoy because of the fine US Troops standing guard.

August 4, 2009

Street Machine of the Year – Top 5

Filed under: Cap Engraving,Custom Fitments,Special Finishes — admin @ 1:00 pm

This past month Good-Guys held their annual Street Machine auto cross event in Columbus Ohio.  Congratulations to Tom Boldry from Kansas City, MO for placing in the Top 5 group in the Street Machine of the Year awards.  His beautiful 1969 Charger is a real stand out with the Pro Touring crowd.  Jason Rock of Rock’s Rod & Custom built the car for Tom.

Owner: Tom Boldry

Location: Kansas City, MO

Vehicle: 1969 Charger

Built by: Rock’s Rod & Custom – Kansas City, MO

 

Wheel Specs:

Style: Boze Friction

Front: 18×8

Rear: 20×10

Finish: Black Powder Coat

Custom Cap Engraving: “RT”

 

Vehicle Specs: 

Front Suspension: Magnum Force tubular K-member with drop spindles, QA-1 shocks

Rear Suspension: hand-fabricated frame rails with triangulated 4-bar with QA-1 coil over shocks

Engine: 472 Hemi with Indy aluminum cylinder heads. It has Mass-Flow fuel injection.

Drive Train: Tremac 5-speed tranny and also has a Ford 9 inch rear axle housing with Detroit Tru-Trac differential.   

69charger1

69-dodge-charger

69charger4

69charger3

July 27, 2009

50th Anniversary Corvette Wheels

Filed under: Cap Engraving,Custom Fitments,Special Finishes — admin @ 4:26 pm

John Creo owns this 2003 Corvette  – 50th Anniversary model.  John wanted to keep the same theme, but upgrade the tire and wheel package to a larger diameter and also fit a big brake package. He chose our 3-piece Tach wheels in sizes 19×9 (front) and 20×11 (rear). We built a special fitment for the Brembo brakes kit.  Keeping with the Corvette 50th Anniversary theme, we powder coated the wheels in a Champagne color and custom engraved the caps with the anniversary logo.

2003 Corvette - 50th AnniversaryCorvette 50th Anniversary - Tach wheel

July 16, 2009

More Than Meets the Eye!

Filed under: Cap Engraving,Special Finishes — admin @ 6:08 pm

We just finished a new set of Injected wheels for Owen Hodgson.  We built the wheels for his 2009 G-37 Coupe. 

Specs:

Custom color accent painting – Athens Blue

Cap engraving – Transformer

We can’t wait to see these wheels on his Coupe!

Injected wheel with Transformer cap

Injected wheel Transformer cap

Powered by WordPress